top of page

VDOT-PYH

6th Edition

ADDRESSABLE MULTISENSORY DETECTOR

vdot-pyh_JPG.webp

VDOT-PYH3

7th Edition

ADDRESSABLE MULTISENSORY DETECTOR

vdot-pyh_JPG.webp

INTRODUCTION

The VDOT-PYH is an attractively-styled, low profile combined photoelectric smoke and heat detector for use with the fire alarm control panel of Velocity MMP series.


This detector is an analog detector that has enabled each detector address to provide exact detector locations. The smoke sensitivity of this detector can be programmed using the control panel software to suit the environment. The detector sensitivity is continually monitored and reported to the panel.


The VDOT-PYH has a new sophisticated smoke chamber design and an orange sensor LED which can provide the same sensitive detection regardless of the type of smoke.


This detector has a chemically etched, stainless steel insect screen therefore reducing the ingress of insects and airborne contaminants.


The VDOT-PYH initiates an alarm in response to both rapid rate-of-rise conditions and fixed heat (57°C). Heat portion incorporates a highly linear thermistor circuit, with the thermistor mounted externally. The specially designed cover protects the thermistor while allowing maximum air flow.

INTRODUCTION

The VDOT-PYH3 has two operating modes for heat detection either rate-of-rise and fixed heat at 57 °C (135 °F).

 

The detector incorporates a heat sensing thermistor, mounted outside of smoke chamber, with the high linear circuit.

 

The specially designed cover protects the thermistor while taking airflow.
 

Detector address is selectable from the range of 1 to
254, and programmed by using the VDOT-AD2 handheld
address-setting tool.

​

A remote LED indicator can be connected to the detector Terminal 3 (RIL) directly.
 

FEATURES:

​

•   Responds well to both black and white smoke.

•   Heat detector detects Rate of Rise and Fixed  temperature.

•   Well suited for sensitive environments.

•   Low Profile, stylish appearance.

•   Low monitoring current.

•   OMNIVIEWTM 360o LED.

•   Remote indicator output.

•   Locking mechanism to avoid unauthorised removal.

•   Supplied with protective dust cover.

•   Address settable from 001 to 254 by a dedicated  programmer.

•   Automatic sensitivity compensation.

•   Adjustable sensitivity via control panel software.

•   Corresponds to auto-test function of Velocity MMP series control panel.


 

FEATURES

​

• Capable of detecting both black and white smoke

• Heat operating mode, rate of rise and fixed heat

   detection at 57 °C (135 °F)

• Low profile, and stylish design

• OMNIVIEW™ 360 degrees LED indicator

• Remote indicator output

• Address selectable from a range of 1 to 254

• Provide with a dust cover

• Sensitivity drift compensation feature

• Selectable sensitivity from three levels

• Low monitoring current

• Reduce cooking nuisance alarms

• Approved to UL268 7th edition and UL521

Drawing PYH.JPG
PYH3 DIMS.PNG
bottom of page